Signagelive Help Centre

[D Range] Rest of World Panels: How to upgrade your Samsung Panel Firmware

Follow

The following guide will show you how to upgrade the firmware on all supported Samsung Smart Signage Platform "D Range" devices.

In this document you will find firmware for the following:

  • 10" SSSP
  • DBD 32, 40, 48, 55, DMD 32, DM32, DS/DSD 32
  • DMD, DSD, DHD, UED
Please note

It is recommended that you wait for at least 60 seconds after powering on your display to proceed with a firmware update.

We recommend you wait at least 30 seconds following insertion of your USB device to allow it to properly initialise and be available for use.

For all "D Range Panels" you can perform automatic updates by:

  1. Switching to an input such as HDMI or DVI
  2. Press Menu, Select Support > Software Update
  3. You now need to select Update Now
  4. The panel will now search for any updates and will take you through the process should any results be found.

10" SSSP - REST OF WORLD

You have indicated that you are using a 10" SSSP series panel, please ensure you have the latest firmware:

If you would like to download the latest firmware:

There is currently no sub-firmware available.

Note the USB folder structure must match:

X:\T-GFSLD1DWWC\image\[rest of the files]


DBD 32, 40, 48, 55 - DMD 32, DM 32, DS/DSD 32 - Rest of World

You have indicated that you are using a DBD/DMD/DM/DS/DSD series panel, please ensure you have the latest firmware:

If you would like to download the latest firmware:

Note the USB folder structure must match:

X:\T-GFSLDDWWC\image\[rest of the files]


DMD, DSD, DHD, UED - Rest of World

You have indicated that you are using a DMD/DSD/DHD/UED series panel, please ensure you have the latest firmware:

If you would like to download the latest firmware:

Note the USB folder structure must match:

X:\T-GFSLDWWC\image\[rest of the files]

Was this article helpful?
0 out of 0 found this helpful

Comments

Powered by Zendesk