Signagelive Help Centre

SSSP - How to configure the Network and Auto-Standby Options

Follow

How to configure the Network and Auto-Standby Options

Configuration of the SSSP is a fairly simple process and should only consist of setting the Signagelive url however there are some items to be
aware of that may occur:

  • The network sometimes needs to be configured manually on the panel
  • Auto Standby needs to be switched off

To configure the network:

  1. Select an input such as HDMI, DVI, TV, PC etc
  2. Press Menu
  3. Select Network 
  4. Follow the wizard
  5. Switch the SSSP off and on

To switch off auto standby:

  1. Select an input such as HDMI, DVI, TV, PC etc
  2. Press Menu
  3. Go into the System Menu
  4. Select General
  5. Set Standby Control Off
  6. Switch the SSSP off and on
  • The network sometimes needs to be configured manually on the panel
  • Auto Standby needs to be switched off

To configure the network:

  1. Select an input such as HDMI, DVI, TV, PC etc
  2. Press Menu
  3. Select Network 
  4. Follow the wizard
  5. Switch the SSSP off and on

To switch off auto standby:

All the following settings are under the System Menu when the menu button is pressed (this can also be accessed via Home button then More Settings). Ensure the following settings are configured:

  1. Auto Source Switching - Auto Source Switching - Off
  2. Power Control - Auto Power On - On
  3. Eco Solution - Energy Saving - Off
  4. Eco Solution - Screen Lamp Schedule - Off
  5. Eco Solution - No Signal Power Off - Off
  6. Eco Solution - Auto Power Off - Off
  • The network sometimes needs to be configured manually on the panel
  • Auto Standby needs to be switched off

To configure the network:

  1. Select an input such as HDMI, DVI, TV, PC etc
  2. Press Menu
  3. Select Network 
  4. Follow the wizard
  5. Switch the SSSP off and on

To switch off auto standby:

All the following settings are under the System Menu when the menu button is pressed (this can also be accessed via Home button then More Settings). Ensure the following settings are configured:

  1. Auto Source Switching - Auto Source Switching - Off
  2. Power Control - Auto Power On - On
  3. Eco Solution - Energy Saving - Off
  4. Eco Solution - Screen Lamp Schedule - Off
  5. Eco Solution - No Signal Power Off - Off
  6. Eco Solution - Auto Power Off - Off
  • The network sometimes needs to be configured manually on the panel
  • Auto Standby needs to be switched off

To configure the network:

  1. Select an input such as HDMI, DVI, TV, PC etc
  2. Press Menu
  3. Select Network 
  4. Follow the wizard
  5. Switch the SSSP off and on

To switch off auto standby:

All the following settings are under the System Menu when the menu button is pressed (this can also be accessed via Home button then More Settings). Ensure the following settings are configured:

  1. Auto Source Switching - Auto Source Switching - Off
  2. Power Control - Auto Power On - On
  3. Eco Solution - Energy Saving - Off
  4. Eco Solution - Screen Lamp Schedule - Off
  5. Eco Solution - No Signal Power Off - Off
  6. Eco Solution - Auto Power Off - Off
Was this article helpful?
0 out of 0 found this helpful

Comments

Powered by Zendesk